Rotobrush Air Duct Cleaning Nationwide

Rotobrush Air Duct Cleaning in Fort Worth: What to Know First

Rotobrush air duct cleaning in Fort Worth typically runs $450 – $850 for a full system, depending on home size, duct access, and how long it’s been since the last cleaning. We’re an independent Rotobrush service provider – not a manufacturer rep – and we quote a written price before any work starts. That price doesn’t move at the door.

Call (682) 255-2572

If you own a Rotobrush system (or you inherited one with a home you just bought), this page tells you what we see in Fort Worth ductwork, what we look for on a Rotobrush job, and what it should cost. Call (682) 255-2572 for a free estimate. We answer live, 24/7.

Roy Castellanos leads our Fort Worth crews. He’s been pulling dust out of North Texas duct systems for the better part of two decades, and he’s seen plenty of older ranch-style homes near the Stockyards where supply trunks are packed decades deep. Clean ducts don’t advertise themselves – but dirty ones will.

Rotobrush Air Duct Cleaning: Key Takeaways

• Full-system Rotobrush cleaning in Fort Worth generally lands between $450 and $850, written down before we start.
• Every Hollis job carries the 365-Day Done Right Promise – if it’s not done right, we come back at no charge, including a free second visit.
• Our techs run the Rotobrush rotary brush plus a Nikro negative-air machine. Brush agitates, vacuum captures – that’s the standard, not an upsell.
• We’re independent. We don’t push Rotobrush OEM parts where a quality aftermarket component does the job better for less, and we tell you which is which before you pay.
• Fort Worth’s clay soil and long dry summers put a heavy dust load on duct systems. Rotobrush systems ride hard here.

How Rotobrush Systems Fail in Fort Worth – and What We Do About It

Rotobrush builds rotary brush systems primarily for their franchise and contractor network. Most Fort Worth homes we clean have Rotobrush’s AIrSweep or the newer HEPA-filtration rigs, often paired with their inspection cameras. The cleaning end holds up. The failure points are usually the simple parts around it. Here’s what we see.

• Brush head bristle wear on high-run systems. On homes where a previous owner had the system cleaned every year, the nylon bristles on the brush head flatten out. AirSweep heads especially. A flattened brush skates across the duct wall instead of scouring it, and the job looks clean when it isn’t. We check bristle condition before we start and swap the head if it’s worn – the cost is built into the written quote, not added after.
• Vacuum hose collapses at the flex connection. This is the most common Rotobrush failure we see in Fort Worth attics. The ribbed hose that runs from the collection drum to the trunk line kinks or collapses in attic heat, usually between the 10- and 15-year mark. The symptom is house dust right after a cleaning, because the vacuum never pulled full suction. A lot of companies miss this – they see the hose attached and assume it’s working. We replace a collapsed flex section before the job runs.
• Negative-air filter gaskets that dry out. Fort Worth summers bake attics past 140 degrees. Rubber door gaskets and filter seals on Rotobrush collection units get brittle and let unfiltered air bypass the HEPA bank. A homeowner won’t see this; they’ll just smell dust a week later. We check the seals on every job and tell you if a gasket swap is needed.
• Inspection camera fogging and moisture damage. Rotobrush’s push cameras get stored hot and cool fast when they hit the duct run. Condensation fogs the lens, and a cleaning crew that can’t see the run is guessing. Worse, if the unit’s stored in a humid Fort Worth garage, the camera housing itself takes on moisture and the picture never comes back fully sharp. We run ours dry and wipe the lens between runs.
• Build-up packed into the return drop, not the supply run. Fort Worth returns pull air across carpet and hardwood for years. In Rotobrush-cleaned homes where only the supply side got attention, the return drop carries a carpet of gray lint that the blower re-circulates through the whole house. A proper Rotobrush job cleans supply and return both, or it’s not a cleaning – it’s a half-job. We quote both sides.

Our Rotobrush Air Duct Cleaning Process

1. 1
   Call and written estimate. You call (682) 255-2572. We talk through the home size, number of supply and return runs, and what you’re seeing – dust on registers, allergy spikes, the last cleaning date. We give you a written dollar range before anyone books a visit.
2. 2
   Walk-through and video inspection. Roy or one of our background-checked, uniformed techs arrives inside the quoted window. We put the Rotobrush camera through the main trunk line and show you the footage on a tablet. You see the build-up before we touch it – nothing happens on faith.
3. 3
   Brush agitation – Rotobrush rotary, not a shop vac on a stick. The Rotobrush head runs through every supply trunk, branch, and return drop. It dislodges the packed layer, not just the loose dust sitting on top. Then the Nikro negative-air machine pulls everything out while it’s airborne.
4. 4
   Component check while the system’s open. We inspect the brush head, flex hoses, gaskets, and camera rig for the failure modes above. If a part is going to fail within the year, we tell you then, with a written price to fix it. No surprise line items at the end.
5. 5
   Register wipe-down and site cleanup. Every register gets cleaned. Drop cloths come up, shoes stay covered, and the site looks like we were never there – except the air moves differently.
6. 6
   Your 365-Day Done Right Promise, in writing. Before we leave, you get a written copy of the guarantee. If the cleaning doesn’t hold up – if dust returns or a component fails within a full year – we come back free. That’s not a courtesy. It’s on paper.

What Rotobrush Air Duct Cleaning Costs in Fort Worth

Here are straight dollar ranges for the Fort Worth market. No teaser coupons, no per-vent pricing games.

• Standard single-story home, 8 – 12 runs: $450 – $600
• Two-story home, 12 – 20 runs, both supply and return: $600 – $800
• Older ranch-style home near the Stockyards or Wedgwood, heavy build-up: $700 – $850
• Commercial or multi-unit Rotobrush job: quoted per system after inspection

What moves the price: number of runs, how many years since the last cleaning, and whether components like flex hoses or brush heads need swapping. Those replacements are priced in writing before we start, not discovered after. Call (682) 255-2572 for a free estimate on your exact system.

Why Fort Worth Homeowners Call Hollis Air Duct Fort Worth for Rotobrush Work

We run Rotobrush equipment on every job, and we know the machine well enough to know when the machine is the problem. Most crews run the brush and move on. We check the hoses, the seals, the bristles, and the camera – because in a Fort Worth attic, those parts fail quietly and the homeowner gets blamed for living in a dusty house.

Every Hollis Air Duct Fort Worth job is backed by the Garrison Standard: arrive inside the quoted window, price in writing before any work starts, complete the job by the book, and leave the site clean. We also service Lennox, Trane, and Carrier systems, so if your Rotobrush setup sits alongside another brand’s unit, one crew handles the whole picture. Our techs are background-checked and uniformed. Our phones ring to a live person, 24/7.

FAQs