Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Guardsman Duct Sealing & Repair: The Fort Worth Owner’s Guide
We stock and install Guardsman-compatible duct sealing and repair components across Fort Worth, with most jobs priced between $450 and $1,800 depending on how much of the duct system needs attention. The work is typically completed in a single visit once we’ve inspected the system and written the price. Most homeowners discover they need this page because a room stopped cooling, a utility bill jumped, or they saw gray tape peeling away from a duct joint in the attic. If the sealant has dried, cracked, or pulled loose from the metal, the system is leaking air you’ve already paid to condition. That’s the problem we fix, and we fix it so it stays fixed.
Which Guardsman Models This Applies To
Guardsman duct sealing products are designed for residential sheet-metal and flex-duct systems, which covers the overwhelming majority of homes built in Fort Worth from the 1950s through today. Whether you have a ranch-style house near the Stockyards or a two-story in Mira Vista, the Guardsman mastic and tape products we carry are matched to the duct diameter, joint type, and air-pressure conditions of your specific setup. The compatibility gotcha most owners miss: Guardsman water-based mastic is rated for interior duct surfaces, but the sealing tape is rated differently for metal-to-metal joints versus flex-to-collar connections. Using the wrong product on the wrong surface is why so many re-seals fail within two years. We match the product to the joint on site, not from a catalog photo.
The OEM versus aftermarket decision matters less here than it does with mechanical parts, because Guardsman’s sealing line is itself a broadly compatible product family. What matters is the mastic’s VOC rating, its cured flexibility, and whether it’s rated for the temperature swings native to a Texas attic. A Fort Worth attic hits 130°F in August. Cheap aftermarket sealant dries brittle under that heat and fails by the next cooling season. We stock the Guardsman line alongside proven equivalents we’ve field-tested on hundreds of local systems.
We’re an independent service provider, not affiliated with Guardsman. We stock their products because they hold up in this climate better than most of what’s on the shelf at a big-box store, and because we can stand behind the work with our own written guarantee.
Styles & brands we work with




Signs Your Guardsman Duct Sealing & Repair Is Failing
- One room won’t hold temperature while the rest of the house is fine. A failed seal on a branch line lets conditioned air escape into the attic before it reaches the register. The room farthest from the air handler is usually the first to show it.
- Your electric bill climbs for no obvious reason. Leaking supply ducts can push 20 to 30 percent of conditioned air into the attic. That’s air you paid to heat or cool, and it’s not reaching a single room.
- You see peeling or cracked mastic at visible duct joints. In Fort Worth’s heat, dried-out sealant looks like cracked mud along the seam. Once it’s separated from the metal, air follows the gap.
- Dust appears faster than it should on registers and furniture. Return-side leaks pull attic air, insulation particles, and fine dust into the system and distribute it through the house.
- The upstairs is noticeably warmer than the downstairs in summer. This is almost always a duct sealing issue when the equipment itself is running fine. Long trunk runs through a hot attic shed pressure at every weak seam.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Fort Worth homeowners can expect for Guardsman duct sealing and repair, installed:
- Single-joint or small-section repair: $180 to $450. This covers a visible failure at one or two accessible seams.
- Typical whole-system sealing on an average 2,000-square-foot home: $650 to $1,200. This is the most common scope we quote: supply and return trunks, branch connections, and plenum-to-unit transitions.
- Large or complex systems with significant return-side leaks: $1,200 to $1,800. Older ranch-style homes with long trunk runs and tight attic access land here.
Every price is written before work begins, and it does not move at the door. The quote covers labor, the Guardsman or equivalent materials matched to your system, and cleanup. It’s one number for the job, not a per-joint tally that adds up to a surprise. Every repair is covered by our 365-Day Done Right Promise. If the seal fails within the year, we return and make it right at no charge, including a free second visit. Nobody in this trade should be selling duct sealing without putting that in writing.
DIY or Call Us?
For any accessible joint you can see in a closet or near the indoor unit, you can inspect it yourself: look for cracked sealant, gaps where the duct meets the collar, or tape that’s lost its adhesion. But actually re-sealing ducts requires getting into the attic, which in a Fort Worth summer is a 130-plus-degree confined space, and the work requires cleaning the joint surface, applying the right product for the surface type, and allowing proper cure time before the system runs again. Do it wrong and the new seal fails within a season, which is the most expensive way to get this job done. We carry the Guardsman line and the tested equivalents on our trucks, so the repair is completed in one visit, with the price in writing before we start. If you see the signs above, call (682) 255-2572 and we’ll take a look.
FAQs
Properly applied, we expect a Guardsman-class mastic seal to hold for 10 to 15 years in a Fort Worth attic. The variables that cut that short are heat-damaged or improperly cleaned surfaces, or the wrong product on the wrong joint type. Our 365-Day Done Right Promise covers any failure in the first year, and if it fails after that, call us for an inspection before you assume it’s the sealant instead of a shifted duct. For an exact quote on sealing your system, call (682) 255-2572.
Most failing seals can be repaired in place by removing the damaged material, cleaning the joint, and re-applying the correct product. We don’t sell a full re-seal when a section repair is all the system needs. The only time replacement makes sense is when the duct itself is compromised: crushed, water-damaged, or separated at the collar.
A typical whole-system sealing job on a Fort Worth home takes 4 to 6 hours on site, including setup, access, application, and cleanup. Single-joint repairs are usually under an hour. You’ll know the exact scope and price before we touch anything.
We stock Guardsman sealing products and tested equivalents on our trucks, so there’s no ordering delay on standard residential systems. If your system needs a specialty Guardsman product we don’t carry, we’ll tell you the price and lead time before any commitment. Call (682) 255-2572 and we’ll check compatibility for your system while you’re on the phone.
Written by Roy Castellanos, Owner, Hollis Air Duct Fort Worth at Hollis Air Duct Fort Worth, serving Fort Worth and nearby areas.