Supply Duct Cleaning in Fort Worth, TX

Supply Duct Cleaning in Fort Worth, TX

Supply duct cleaning in Fort Worth typically costs $285 – $490 for a single system and is completed in 3 to 6 hours. The supply side is the network of ducts that carries conditioned air from your furnace or air handler into the rooms of your home, and because it runs after the filter, it’s where dust, construction debris, and pet hair accumulate most. Hollis Air Duct Fort Worth cleans supply ductwork with negative-air machines and rotary brush systems so the air coming out of your registers is as clean as the air entering the system. Call (682) 255-2572 for a written quote before any work begins.

If you’re looking for a broader overview of what this type of service involves, our Air Duct Cleaning page covers the full system. This page focuses specifically on the supply side: how it gets dirty, what it costs to clean in Fort Worth, and what you should expect from a crew that does it by the book.

Key Takeaways

• Cost range: $285 – $490 for most Fort Worth single-family homes, with larger or heavily soiled systems running higher.
• Time on site: 3 to 6 hours for a standard job, including setup, cleaning, and teardown.
• What we clean: supply trunk lines, branch runs, register boots, and the supply plenum.
• What you get in writing: a fixed price before work starts and the 365-Day Done Right Promise covering every job for a full year.
• Who shows up: background-checked, uniformed technicians employed by an independently owned Garrison Partners business.

When You Need Supply Duct Cleaning

The supply side of your duct system moves every cubic foot of conditioned air you pay to heat and cool. Over time, that air stream carries fine dust, skin cells, pet dander, and debris from the return side or from gaps in the ductwork itself. Here are the signs that your supply ducts in Fort Worth are due for cleaning:

• Visible dust puffing from registers when the blower kicks on. If you see a small cloud when the system starts, the supply ducts are holding loose particulate and pushing it into your living space.
• Uneven heating or cooling between rooms. Supply ducts lined with built-up debris restrict airflow. The room at the end of the longest run always suffers first, and in Fort Worth’s July heat, that room never reaches the thermostat setting.
• A musty or stale smell that only appears when the AC or heat runs. Supply ducts can hold moisture from Fort Worth’s humid summer months, and that moisture binds dust into a film that holds odors.
• Renovation or new construction dust. If you’ve had flooring, drywall, or trim work done, that fine dust gets pulled into the return side and blown into the supply network. It will keep circulating long after the contractor leaves.
• Family members with allergies or respiratory irritation that improve away from home. Supply ducts distribute whatever they hold. If symptoms drop when you travel and return when you’re back, the ductwork is a likely contributor.
• You’ve never had the supply side cleaned and the home is older than 10 years. Most Fort Worth homes should have supply ducts cleaned every 4 to 7 years, more often with shedding pets or high AC runtime.

If you’re noticing dust accumulation on furniture within days of cleaning, the issue may sit further upstream. Our Air Duct Cleaning in Fort Worth page explains how the return side, plenum, and supply side work together, and why cleaning only one part rarely fixes the problem.

Our Supply Duct Cleaning Process

We follow a set sequence on every supply duct cleaning job in Fort Worth. The order matters: you can’t clean ducts properly without first cutting negative air, and you can’t verify the work without a Video Inspection to see what came out. Here’s how it goes:

1. Walkthrough and written quote. Before any equipment comes off the truck, the technician inspects the supply plenum, accessible branch runs, and a sampling of registers. You get a written price based on what we find. That price does not move at the door.
2. Negative-air containment setup. We connect a Nikro or Abatement Technologies negative-air machine to the supply trunk. This puts the ductwork under vacuum so that debris dislodged during cleaning is pulled to the collection unit, not pushed into your rooms through the registers.
3. Register and boot preparation. Every supply register is removed, cleaned, and inspected. The technician checks each register boot for gaps, rust, or signs of moisture. Loose boots are flagged and can be sealed during the same visit.
4. Mechanical agitation. We run a Rotobrush rotary brush system through the supply trunk and branch runs. The brush breaks the dust film and debris loose from the duct walls while the negative-air machine captures it at the point of collection.
5. Supply plenum and trunk inspection. After the brush pass, the technician visually inspects the supply plenum with a camera. This is where we catch issues like separated joints, dead-end runs, or debris that the brush could not reach. If we find a problem, we show you the footage before recommending a fix.
6. Final walkthrough and cleanup. All registers are reinstalled, the equipment is removed, and the work area is left as clean as we found it. The site-left-clean standard is part of The Garrison Code, not an optional courtesy. You’ll see the collection canister contents before we haul them away, because you should know what came out of your ducts.

Every step on that list is covered by our 365-Day Done Right Promise in writing. If the work fails within a year, we return and make it right at no charge, including a free second visit.

Supply Duct Cleaning Pricing in Fort Worth

Supply duct cleaning in Fort Worth typically runs $285 to $490 for a single residential system. The final price depends on the size of the home, the number of supply runs, the level of soiling, and whether the supply plenum requires additional work. Here’s how pricing generally breaks down:

Service Component	Typical Fort Worth Price Range
Supply duct cleaning, single system (up to 10 supply runs)	$285 – $340
Supply duct cleaning, larger home (11 – 20 supply runs)	$340 – $440
Heavily soiled or construction-debris system	$440 – $490+
Register boot cleaning (per boot, added to base)	$12 – $18 per boot
Supply plenum inspection (camera)	Included with cleaning
Duct sealing at identified leaks (mastic, per access point)	Quoted separately, after inspection

Several factors move the price. Homes with long, low-clearance attic runs take more time than homes with open basements or raised foundations, which are common in older Fort Worth neighborhoods like Ridglea, Wedgwood, and the areas around TCU. Systems with flexible duct that has sagged or kinked need more careful brush work than rigid galvanized runs. And if the supply ducts haven’t been cleaned in 10 or 15 years, the buildup simply takes longer to remove.

What we don’t do is quote one price on the phone and change it after we walk in. The price is written down before work starts, and it does not move. If the technician finds a separated joint or a dead-end run during the inspection, that’s a separate conversation with a separate written quote before any additional work happens.

Estimates are free. Call (682) 255-2572 and we’ll set a window for a technician to inspect your supply ductwork and hand you a written price on the spot.

Why Fort Worth Homes Need Supply Duct Attention

Fort Worth’s climate puts specific strain on supply ductwork. Summers run long and hot, with AC systems cycling for months at a stretch. Winter brings dry air and occasional hard freezes. The constant cycling means air is always moving through the supply side, and whatever sits in those ducts gets distributed through the house daily.

There’s also the construction factor. Fort Worth has grown quickly, and a significant share of homes in Parker County and Tarrant County were built during or just after boom cycles when contractors were moving fast. We regularly find supply ducts with drywall dust, sawdust, and even trim nails sitting in the runs. That material doesn’t harm the ducts, but it does mean every time the blower starts, fine dust gets pushed into the living space.

Older homes near Downtown Fort Worth, Fairmount, and the Historic Southside often have decades-old supply runs, some with gaps at the seams that pull attic air into the conditioned stream. After cleaning, those gaps become visible, and sealing them with duct mastic is a common follow-up service we provide. The mastic works like a professional-grade caulk designed specifically for ductwork: it seals the leak and stays flexible through temperature cycles.

Common Supply Duct Problems We Find in Fort Worth

• Separated joints at register boots. Attic heat or crawl space moisture weakens tape over time. Conditioned air leaks into the attic, and the system works harder to keep the house comfortable.
• Dead-end runs capped poorly. Builders sometimes cap unused branch runs with tape that deteriorates, leaving a pocket that collects dust and eventually dumps it into the system.
• Crushed flexible duct. In Fort Worth attics, insulation, storage boxes, or past contractors stepping on flex duct can kink or flatten it. Restricted supply runs mean some rooms never get enough air.
• Dust film on duct walls. The most common issue. The film may look uniform and harmless, but it’s a mix of dust, skin cells, and fibers, and it feeds dust mites and holds odors.
• Moisture staining in supply boots. Fort Worth’s humid stretches, especially in spring and early fall, can create condensation at the boot if the seal at the register is poor. We flag any staining we see, because it often points to a fix that cleaning alone will not solve.

Equipment We Run on Supply Duct Jobs

A supply duct cleaning is only as good as the equipment pulling and agitating. We run professional-grade gear from Rotobrush and Nikro, the same brands commercial cleaning crews use on large buildings. Here’s what each piece does, in plain terms:

• Rotobrush rotary brush system: A motorized brush that spins as it travels through the duct, physically breaking dust and debris loose from the walls. Without this step, you’re just vacuuming air, not cleaning the surface.
• Nikro negative-air machine: A high-powered vacuum connected to the ductwork that puts the entire supply side under negative pressure. Everything the brush loosens gets pulled toward the collection unit instead of drifting out of the registers into your home.
• Guardsman filtration components: Used on the vacuum side to capture fine particulate before it reaches the machine exhaust, so what we remove from your ducts stays removed from your air.

We explain the equipment on site in plain terms, not because homeowners need to know every specification, but because you deserve to understand what’s being done inside the walls and ceiling spaces of your home.

The Garrison Standard and the 365-Day Done Right Promise

Hollis Air Duct Fort Worth is part of the Garrison Partners family, founded in 2004 and run under The Garrison Standard. That standard isn’t a marketing line; it’s an operational requirement. It means four things on every job:

1. Arrive inside the quoted window. You get a time window when you book. The technician shows up inside it. If something breaks that promise, you’ll hear from us before the window closes, not after.
2. Price in writing before work starts. No verbal estimates that turn into surprises. The price is on paper, agreed to, and locked for the work described.
3. Complete the job by the book. The process we described above is the process we follow. No shortcuts, no skipped steps, no “good enough” calls.
4. Leave the site clean. Floors protected, equipment removed, registers reinstalled, and the work area left the way we found it. If we leave dust, we didn’t finish the job.

The 365-Day Done Right Promise is our written guarantee on every air duct cleaning, dryer vent cleaning, duct sealing, and supply duct cleaning job we perform in Fort Worth. If the work fails within a full year, we return and make it right at no charge. That includes a free second visit. Most companies in this trade will not put that in writing. We do, because the standard behind the work is what justifies it.

Who Shows Up at Your Door

Every technician who arrives at a Fort Worth home for a supply duct cleaning is a background-checked, uniformed employee of Hollis Air Duct Fort Worth. You know the person walking into your home has been vetted, trained on the equipment we run, and is accountable to The Garrison Standard. If a problem comes up, you’re not chasing a subcontractor who parked his truck in three counties since you last saw him. You’re calling us, and we answer.

Our phones are answered by a live person 24 hours a day, 7 days a week. There is no voicemail loop and no callback queue. If you call at 2 a.m. with a question about your supply ducts, a person picks up.

FAQs – Supply Duct Cleaning

How much does supply duct cleaning cost in Fort Worth?

Supply duct cleaning in Fort Worth typically costs $285 to $490 for a single system, depending on home size, number of supply runs, and how heavily soiled the ducts are. The price is written before work starts and does not move at the door. Call (682) 255-2572 for a free written estimate.

How long does supply duct cleaning take?

Most supply duct cleaning jobs in Fort Worth take 3 to 6 hours from setup to final walkthrough. Larger homes with more supply runs or heavily soiled systems run longer. We’ll give you a time window when you book and the technician arrives inside it.

Can you clean only the supply ducts, or is the whole system needed?

We can clean the supply side alone, and for some Fort Worth homes that’s the right scope. But if the return side is also dirty, the system will re-contaminate quickly. During the walkthrough, the technician will show you what’s in each section so you can make an informed call. A full Air Duct Cleaning covers both sides and is often the better value.

Is supply duct cleaning worth it if I just changed my filter?

A clean filter protects the equipment, but it does nothing for dust already packed onto the walls of your supply ducts. The filter sits on the return side, so everything downstream of it, which is your entire supply network, never touches the filter. Supply duct cleaning is how you remove what the filter can’t reach. Call (682) 255-2572 and we’ll walk you through what’s actually in your ducts before you decide.

Does the 365-Day Done Right Promise apply to supply duct cleaning?

Yes. Every supply duct cleaning job from Hollis Air Duct Fort Worth is covered in writing for a full year. If the work fails within 365 days, we return and make it right at no charge, including a free second visit. The guarantee is printed on every job, not buried in fine print.

Schedule Your Supply Duct Cleaning in Fort Worth

If your supply ducts are pushing dust into your living space or you’ve noticed rooms that never quite reach the right temperature, the fix starts with a phone call. We’ll schedule a walkthrough, hand you a written price before any work starts, and clean the supply side the right way, with professional equipment and The Garrison Standard behind every step. Call (682) 255-2572 for a free estimate. A live person answers, 24/7.

Written by Roy Castellanos, Owner at Hollis Air Duct Fort Worth, serving Fort Worth.